##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/bbs-3.17-bioc/R/bin/R CMD check --install=check:DIAlignR.install-out.txt --library=/home/biocbuild/bbs-3.17-bioc/R/library --timings DIAlignR_2.7.0.tar.gz
###
##############################################################################
##############################################################################


* using log directory ‘/home/biocbuild/bbs-3.17-bioc/meat/DIAlignR.Rcheck’
* using R Under development (unstable) (2023-01-14 r83615)
* using platform: aarch64-unknown-linux-gnu (64-bit)
* R was compiled by
    gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
    GNU Fortran (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
* running under: Ubuntu 22.04.1 LTS
* using session charset: UTF-8
* checking for file ‘DIAlignR/DESCRIPTION’ ... OK
* checking extension type ... Package
* this is package ‘DIAlignR’ version ‘2.7.0’
* package encoding: UTF-8
* checking package namespace information ... OK
* checking package dependencies ... OK
* checking if this is a source package ... OK
* checking if there is a namespace ... OK
* checking for hidden files and directories ... NOTE
Found the following hidden files and directories:
  .dockerignore
These were most likely included in error. See section ‘Package
structure’ in the ‘Writing R Extensions’ manual.
* checking for portable file names ... OK
* checking for sufficient/correct file permissions ... OK
* checking whether package ‘DIAlignR’ can be installed ... OK
* used C++ compiler: ‘g++ (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0’
* checking installed package size ... NOTE
  installed size is 27.6Mb
  sub-directories of 1Mb or more:
    extdata   4.0Mb
    libs     16.8Mb
    metabo    4.1Mb
    ptms      1.5Mb
* checking package directory ... OK
* checking DESCRIPTION meta-information ... OK
* checking top-level files ... OK
* checking for left-over files ... OK
* checking index information ... OK
* checking package subdirectories ... OK
* checking R files for non-ASCII characters ... OK
* checking R files for syntax errors ... OK
* checking whether the package can be loaded ... OK
* checking whether the package can be loaded with stated dependencies ... OK
* checking whether the package can be unloaded cleanly ... OK
* checking whether the namespace can be loaded with stated dependencies ... OK
* checking whether the namespace can be unloaded cleanly ... OK
* checking dependencies in R code ... NOTE
Namespace in Imports field not imported from: ‘magrittr’
  All declared Imports should be used.
* checking S3 generic/method consistency ... OK
* checking replacement functions ... OK
* checking foreign function calls ... OK
* checking R code for possible problems ... NOTE
alignTargetedRuns: no visible binding for global variable ‘peptide_id’
alignTargetedRuns : <anonymous>: no visible global function definition
  for ‘.’
alignTargetedRuns: no visible binding for global variable ‘intensity’
alignToRoot4: no visible binding for global variable ‘trees’
alignToRoot4: no visible binding for global variable ‘precursors’
alignToRoot4: no visible binding for global variable ‘intensity’
childXICs: possible error in cummax(v = cummax(ifelse(is.na(x), -Inf,
  x))): unused argument (v = cummax(ifelse(is.na(x), -Inf, x)))
dist4split: no visible global function definition for ‘as.dist’
distMat.rSqrd : <anonymous> : <anonymous>: no visible binding for
  global variable ‘RT.ref’
distMat.rSqrd : <anonymous> : <anonymous>: no visible binding for
  global variable ‘RT.eXp’
fetchPrecursorsInfo: no visible binding for global variable
  ‘transition_id’
fetchPrecursorsInfo: no visible global function definition for ‘.’
fetchPrecursorsInfo: no visible binding for global variable
  ‘transition_group_id’
fetchTransitionsFromRun: no visible binding for global variable
  ‘intensity’
fetchTransitionsFromRun: no visible global function definition for ‘.’
fetchTransitionsFromRun: no visible binding for global variable
  ‘transition_group_id’
fetchTransitionsFromRun: no visible binding for global variable
  ‘peak_group_rank’
fetchTransitionsFromRun: no visible global function definition for
  ‘head’
getNativeIDs: no visible binding for global variable ‘peptide_id’
getPeptideScores: no visible binding for global variable ‘col2’
getPeptideScores: no visible binding for global variable ‘run’
getQuery: no visible binding for global variable
  ‘identifying.transitionPEPfilter’
getRTdf: no visible binding for global variable ‘peak_group_rank’
getRTdf: no visible binding for global variable ‘m_score’
getRTdf: no visible global function definition for ‘.’
getRTdf: no visible binding for global variable ‘transition_group_id’
getRTdf: no visible binding for global variable ‘RT’
getRefRun : <anonymous>: no visible binding for global variable
  ‘pvalue’
ipfReassignFDR: no visible binding for global variable ‘ref_run’
ipfReassignFDR: no visible binding for global variable ‘run’
ipfReassignFDR: no visible global function definition for ‘.’
ipfReassignFDR: no visible binding for global variable ‘i.to’
ipfReassignFDR: no visible binding for global variable ‘m_score_new’
ipfReassignFDR: no visible binding for global variable ‘ms2_m_score’
ipfReassignFDR: no visible binding for global variable ‘m_score’
mstAlignRuns: no visible binding for global variable ‘ropenms’
mstAlignRuns: no visible binding for global variable ‘peptide_id’
mstAlignRuns : <anonymous>: no visible global function definition for
  ‘.’
mstAlignRuns: no visible binding for global variable ‘intensity’
mstScript1: no visible binding for global variable ‘ropenms’
mstScript2: no visible binding for global variable ‘fileInfo’
mstScript2: no visible binding for global variable ‘peptide_id’
mstScript2: no visible binding for global variable ‘features’
mstScript2 : <anonymous>: no visible global function definition for ‘.’
mstScript2 : <anonymous>: no visible binding for global variable
  ‘features’
mstScript2: no visible binding for global variable ‘intensity’
progAlignRuns: no visible binding for global variable ‘peptide_id’
progAlignRuns : <anonymous>: no visible global function definition for
  ‘.’
progAlignRuns: no visible binding for global variable ‘intensity’
progComb3: no visible binding for global variable ‘precursors’
progComb3: no visible binding for global variable ‘ropenms’
progSplit2: no visible binding for global variable ‘trees’
progSplit2: no visible binding for global variable ‘scoreFile’
progSplit2: no visible binding for global variable ‘precursors’
progSplit2 : <anonymous>: no visible global function definition for ‘.’
progSplit2: no visible binding for global variable ‘ropenms’
progSplit4: no visible binding for global variable ‘precursors’
progSplit4 : <anonymous>: no visible global function definition for ‘.’
progSplit4: no visible binding for global variable ‘intensity’
progTree1: no visible binding for global variable ‘ropenms’
progTree1: no visible binding for global variable ‘peptide_id’
reIntensity: no visible binding for global variable ‘run’
reIntensity: no visible binding for global variable ‘alignment_rank’
recalculateIntensity: no visible binding for global variable
  ‘peptide_id’
recalculateIntensity: no visible binding for global variable
  ‘chromatogramIndex’
script2: no visible binding for global variable ‘fileInfo’
script2: no visible binding for global variable ‘peptide_id’
script2 : <anonymous>: no visible global function definition for ‘.’
script2: no visible binding for global variable ‘features’
script2: no visible binding for global variable ‘globalFits’
script2: no visible binding for global variable ‘RSE’
script2: no visible binding for global variable ‘intensity’
setRootRank : <anonymous>: no visible global function definition for
  ‘.’
writeTables: no visible binding for global variable ‘peptide_id’
writeTables: no visible binding for global variable ‘run’
writeTables: no visible binding for global variable ‘precursor’
Undefined global functions or variables:
  . RSE RT RT.eXp RT.ref alignment_rank as.dist chromatogramIndex col2
  features fileInfo globalFits head i.to
  identifying.transitionPEPfilter intensity m_score m_score_new
  ms2_m_score peak_group_rank peptide_id precursor precursors pvalue
  ref_run ropenms run scoreFile transition_group_id transition_id trees
Consider adding
  importFrom("datasets", "trees")
  importFrom("stats", "as.dist")
  importFrom("utils", "head")
to your NAMESPACE file.
* checking Rd files ... OK
* checking Rd metadata ... OK
* checking Rd cross-references ... OK
* checking for missing documentation entries ... OK
* checking for code/documentation mismatches ... OK
* checking Rd \usage sections ... OK
* checking Rd contents ... OK
* checking for unstated dependencies in examples ... OK
* checking contents of ‘data’ directory ... OK
* checking data for non-ASCII characters ... OK
* checking data for ASCII and uncompressed saves ... OK
* checking line endings in C/C++/Fortran sources/headers ... OK
* checking compiled code ... NOTE
Note: information on .o files is not available
File ‘/home/biocbuild/bbs-3.17-bioc/R/library/DIAlignR/libs/DIAlignR.so’:
  Found ‘_ZSt4cout’, possibly from ‘std::cout’ (C++)

Compiled code should not call entry points which might terminate R nor
write to stdout/stderr instead of to the console, nor use Fortran I/O
nor system RNGs nor [v]sprintf. The detected symbols are linked into
the code but might come from libraries and not actually be called.

See ‘Writing portable packages’ in the ‘Writing R Extensions’ manual.
* checking files in ‘vignettes’ ... OK
* checking examples ... OK
Examples with CPU (user + system) or elapsed time > 5s
                    user system elapsed
alignTargetedRuns 10.532  9.916  11.370
alignToMaster      4.460  0.087   5.113
* checking for unstated dependencies in ‘tests’ ... OK
* checking tests ...
  Running ‘testthat.R’
 ERROR
Running the tests in ‘tests/testthat.R’ failed.
Last 13 lines of output:
  Error : Unable to find conda binary. Is Anaconda installed?
  [ FAIL 1 | WARN 9 | SKIP 8 | PASS 626 ]
  
  ══ Skipped tests ═══════════════════════════════════════════════════════════════
  • empty test (5)
  • ropenms not available for testing. A conda environment with name TricEnvr is MUST for testing. (3)
  
  ══ Failed tests ════════════════════════════════════════════════════════════════
  ── Failure ('test_utils.R:170'): test_ipfReassignFDR ───────────────────────────
  `finalTbl` not equal to `expData`.
  Column 'RT': 'is.NA' value mismatch: 2 in current 0 in target
  
  [ FAIL 1 | WARN 9 | SKIP 8 | PASS 626 ]
  Error: Test failures
  Execution halted
* checking for unstated dependencies in vignettes ... OK
* checking package vignettes in ‘inst/doc’ ... OK
* checking running R code from vignettes ...
  ‘DIAlignR-vignette.Rmd’ using ‘UTF-8’... OK
 NONE
* checking re-building of vignette outputs ... OK
* checking PDF version of manual ... OK
* DONE

Status: 1 ERROR, 5 NOTEs
See
  ‘/home/biocbuild/bbs-3.17-bioc/meat/DIAlignR.Rcheck/00check.log’
for details.

##############################################################################
##############################################################################
###
### Running command:
###
###   /home/biocbuild/bbs-3.17-bioc/R/bin/R CMD INSTALL DIAlignR
###
##############################################################################
##############################################################################


* installing to library ‘/home/biocbuild/bbs-3.17-bioc/R/library’
* installing *source* package ‘DIAlignR’ ...
** using staged installation
** libs
using C++ compiler: ‘g++ (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0’
using C++14
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c ChromatogramPeak.cpp -o ChromatogramPeak.o
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c DPosition.cpp -o DPosition.o
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c MSChromatogram.cpp -o MSChromatogram.o
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c PeakIntegrator.cpp -o PeakIntegrator.o
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c RcppExports.cpp -o RcppExports.o
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c Rmain.cpp -o Rmain.o
Rmain.cpp: In function ‘Rcpp::NumericVector areaIntegrator(Rcpp::List, Rcpp::List, double, double, std::string, std::string, bool, bool, int, int)’:
Rmain.cpp:273:21: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  273 |     for(int i = 0; i<vov2.size(); i++) sgolay.smoothChroms(vov2[i]);
      |                    ~^~~~~~~~~~~~
Rmain.cpp: In function ‘Rcpp::NumericMatrix sgolayCpp(Rcpp::NumericMatrix, int, int)’:
Rmain.cpp:305:19: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<double>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  305 |   for(int i = 0; i<d.size(); i++){
      |                  ~^~~~~~~~~
Rmain.cpp: In function ‘Rcpp::NumericMatrix getAlignedTimesCpp(Rcpp::List, Rcpp::List, int, int, std::string, double, std::string, std::string, const std::vector<double>&, double, double, double, bool, double, double, int, bool, double)’:
Rmain.cpp:368:21: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  368 |     for(int i = 0; i<intensity1.size(); i++){
      |                    ~^~~~~~~~~~~~~~~~~~
Rmain.cpp: In function ‘Rcpp::List getChildXICpp(Rcpp::List, Rcpp::List, int, int, std::string, double, std::string, std::string, const std::vector<double>&, double, double, double, bool, double, double, int, bool, double, double, std::string, std::string, bool)’:
Rmain.cpp:771:21: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  771 |     for(int i = 0; i<intensity1.size(); i++){
      |                    ~^~~~~~~~~~~~~~~~~~
Rmain.cpp:818:20: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<int>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  818 |   for(int i = 0; i < keep.size(); i++){
      |                  ~~^~~~~~~~~~~~~
Rmain.cpp:824:20: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  824 |   for(int j = 0; j <intensity1NN.size(); j++){
      |                  ~~^~~~~~~~~~~~~~~~~~~~
Rmain.cpp:827:22: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<int>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  827 |     for(int i = 0; i < keep.size(); i++){
      |                    ~~^~~~~~~~~~~~~
Rmain.cpp:837:20: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<int>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  837 |   for(int i = 0; i < keep.size(); i++) alignedChildTime[keep[i]] = t1NN[i];
      |                  ~~^~~~~~~~~~~~~
Rmain.cpp:862:21: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  862 |   for (int i = 0; i < intensity1NN.size(); i++){
      |                   ~~^~~~~~~~~~~~~~~~~~~~~
Rmain.cpp:873:28: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<double>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  873 |     for(int i =0, j = 0; i < alignedChildTime.size(); i++){
      |                          ~~^~~~~~~~~~~~~~~~~~~~~~~~~
Rmain.cpp: In function ‘Rcpp::List otherChildXICpp(Rcpp::List, Rcpp::List, int, int, Rcpp::NumericMatrix, std::vector<double>, double, std::string)’:
Rmain.cpp:944:21: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  944 |     for(int i = 0; i<intensity1.size(); i++){
      |                    ~^~~~~~~~~~~~~~~~~~
Rmain.cpp:972:20: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  972 |   for(int j = 0; j <intensity1NN.size(); j++){
      |                  ~~^~~~~~~~~~~~~~~~~~~~
Rmain.cpp:975:22: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<int>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  975 |     for(int i = 0; i < keep.size(); i++){
      |                    ~~^~~~~~~~~~~~~
Rmain.cpp:1008:21: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
 1008 |   for (int i = 0; i < intensity1NN.size(); i++){
      |                   ~~^~~~~~~~~~~~~~~~~~~~~
In file included from Rmain.cpp:19:
miscell.h: At global scope:
miscell.h:14:19: warning: ‘const bool DIAlign::detect_end_na(double, double)’ declared ‘static’ but never defined [-Wunused-function]
   14 | static bool const detect_end_na(double a, double b);
      |                   ^~~~~~~~~~~~~
miscell.h:16:19: warning: ‘const bool DIAlign::detect_start_na(double, double)’ declared ‘static’ but never defined [-Wunused-function]
   16 | static bool const detect_start_na(double a, double b);
      |                   ^~~~~~~~~~~~~~~
miscell.h:18:19: warning: ‘const bool DIAlign::lessZero(double)’ declared ‘static’ but never defined [-Wunused-function]
   18 | static bool const lessZero(double a);
      |                   ^~~~~~~~
In file included from miscell.h:9,
                 from Rmain.cpp:19:
spline.h:390:10: warning: ‘double DIAlign::{anonymous}::tk::spline::deriv(int, double) const’ defined but not used [-Wunused-function]
  390 |   double spline::deriv(int order, double x) const
      |          ^~~~~~
spline.h:364:10: warning: ‘double DIAlign::{anonymous}::tk::spline::operator()(double) const’ defined but not used [-Wunused-function]
  364 |   double spline::operator() (double x) const
      |          ^~~~~~
spline.h:273:8: warning: ‘void DIAlign::{anonymous}::tk::spline::set_points(const std::vector<double>&, const std::vector<double>&, bool)’ defined but not used [-Wunused-function]
  273 |   void spline::set_points(const std::vector<double>& x,
      |        ^~~~~~
spline.h:261:8: warning: ‘void DIAlign::{anonymous}::tk::spline::set_boundary(DIAlign::{anonymous}::tk::spline::bd_type, double, DIAlign::{anonymous}::tk::spline::bd_type, double, bool)’ defined but not used [-Wunused-function]
  261 |   void spline::set_boundary(spline::bd_type left, double left_value,
      |        ^~~~~~
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c SavitzkyGolayFilter.cpp -o SavitzkyGolayFilter.o
In file included from /home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include/Eigen/Core:507,
                 from /home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include/Eigen/Dense:1,
                 from /home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include/RcppEigenForward.h:30,
                 from /home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include/RcppEigen.h:25,
                 from SavitzkyGolayFilter.cpp:1:
/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include/Eigen/src/Core/products/TriangularMatrixVector.h: In static member function ‘static void Eigen::internal::trmv_selector<Mode, 1>::run(const Lhs&, const Rhs&, Dest&, const typename Dest::Scalar&) [with Lhs = Eigen::Transpose<const Eigen::Block<const Eigen::Block<Eigen::Matrix<double, -1, -1>, -1, -1, false>, -1, -1, false> >; Rhs = Eigen::Transpose<const Eigen::CwiseBinaryOp<Eigen::internal::scalar_product_op<double, double>, const Eigen::CwiseNullaryOp<Eigen::internal::scalar_constant_op<double>, const Eigen::Matrix<double, 1, -1> >, const Eigen::Transpose<const Eigen::Block<const Eigen::Block<const Eigen::Block<Eigen::Matrix<double, -1, -1>, -1, -1, false>, -1, 1, true>, -1, 1, false> > > >; Dest = Eigen::Transpose<Eigen::Block<Eigen::Block<Eigen::Matrix<double, -1, -1, 1, -1, -1>, 1, -1, true>, 1, -1, false> >; int Mode = 6]’:
/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include/Eigen/src/Core/products/TriangularMatrixVector.h:332:12: warning: ‘result’ may be used uninitialized [-Wmaybe-uninitialized]
  327 |     internal::triangular_matrix_vector_product
      |     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  328 |       <Index,Mode,
      |       ~~~~~~~~~~~~
  329 |        LhsScalar, LhsBlasTraits::NeedToConjugate,
      |        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  330 |        RhsScalar, RhsBlasTraits::NeedToConjugate,
      |        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  331 |        RowMajor>
      |        ~~~~~~~~~
  332 |       ::run(actualLhs.rows(),actualLhs.cols(),
      |       ~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  333 |             actualLhs.data(),actualLhs.outerStride(),
      |             ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  334 |             actualRhsPtr,1,
      |             ~~~~~~~~~~~~~~~
  335 |             dest.data(),dest.innerStride(),
      |             ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  336 |             actualAlpha);
      |             ~~~~~~~~~~~~
/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include/Eigen/src/Core/products/TriangularMatrixVector.h:105:24: note: by argument 5 of type ‘const double*’ to ‘static void Eigen::internal::triangular_matrix_vector_product<Index, Mode, LhsScalar, ConjLhs, RhsScalar, ConjRhs, 1, Version>::run(Index, Index, const LhsScalar*, Index, const RhsScalar*, Index, Eigen::internal::triangular_matrix_vector_product<Index, Mode, LhsScalar, ConjLhs, RhsScalar, ConjRhs, 1, Version>::ResScalar*, Index, const ResScalar&) [with Index = long int; int Mode = 6; LhsScalar = double; bool ConjLhs = false; RhsScalar = double; bool ConjRhs = false; int Version = 0]’ declared here
  105 | EIGEN_DONT_INLINE void triangular_matrix_vector_product<Index,Mode,LhsScalar,ConjLhs,RhsScalar,ConjRhs,RowMajor,Version>
      |                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c affinealignment.cpp -o affinealignment.o
affinealignment.cpp: In function ‘double DIAlign::AffineAlignment::getOlapAffineAlignStartIndices(double*, double*, double*, int, int, int&, int&, DIAlign::Traceback::tbJump&)’:
affinealignment.cpp:485:16: warning: ‘MaxColIndex’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  485 |   OlapStartCol = MaxColIndex;
      |   ~~~~~~~~~~~~~^~~~~~~~~~~~~
affinealignment.cpp:484:16: warning: ‘MaxRowIndex’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  484 |   OlapStartRow = MaxRowIndex;
      |   ~~~~~~~~~~~~~^~~~~~~~~~~~~
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c affinealignobj.cpp -o affinealignobj.o
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c alignment.cpp -o alignment.o
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c chromSimMatrix.cpp -o chromSimMatrix.o
chromSimMatrix.cpp: In function ‘std::vector<double> DIAlign::SimilarityMatrix::perSampleEucLenVecOfVec(const std::vector<std::vector<double> >&)’:
chromSimMatrix.cpp:32:21: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<double>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
   32 |   for (int i = 0; i < mag.size(); i++){
      |                   ~~^~~~~~~~~~~~
chromSimMatrix.cpp: In function ‘std::vector<double> DIAlign::SimilarityMatrix::perSampleSqrSumVecOfVec(const std::vector<std::vector<double> >&)’:
chromSimMatrix.cpp:45:21: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<double>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
   45 |   for (int i = 0; i < mag.size(); i++){
      |                   ~~^~~~~~~~~~~~
chromSimMatrix.cpp: In function ‘std::vector<double> DIAlign::SimilarityMatrix::perSampleMeanVecOfVec(const std::vector<std::vector<double> >&)’:
chromSimMatrix.cpp:57:21: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<double>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
   57 |   for (int i = 0; i < mean.size(); i++){
      |                   ~~^~~~~~~~~~~~~
chromSimMatrix.cpp: In function ‘std::vector<double> DIAlign::SimilarityMatrix::perSampleSumVecOfVec(const std::vector<std::vector<double> >&)’:
chromSimMatrix.cpp:70:21: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<double>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
   70 |   for (int i = 0; i < sum.size(); i++){
      |                   ~~^~~~~~~~~~~~
chromSimMatrix.cpp: In function ‘DIAlign::SimMatrix DIAlign::SimilarityMatrix::getSimilarityMatrix(const std::vector<std::vector<double> >&, const std::vector<std::vector<double> >&, std::string, std::string, double, double, int)’:
chromSimMatrix.cpp:414:22: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<double>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  414 |     for(int i = 0; i < MASK.size(); i++){
      |                    ~~^~~~~~~~~~~~~
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c constrainMat.cpp -o constrainMat.o
constrainMat.cpp: In function ‘void DIAlign::ConstrainMatrix::calcNoBeefMask2(DIAlign::SimMatrix&, std::vector<double>, std::vector<double>, std::vector<double>, int, bool)’:
constrainMat.cpp:78:10: warning: unused variable ‘mapped’ [-Wunused-variable]
   78 |   double mapped = 0.0;
      |          ^~~~~~
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c gapPenalty.cpp -o gapPenalty.o
gapPenalty.cpp: In function ‘double DIAlign::getGapPenalty(const DIAlign::SimMatrix&, double, std::string)’:
gapPenalty.cpp:26:35: warning: ‘gapPenalty’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   26 |   return std::max(0.01, gapPenalty); // gapPenalty must be positive.
      |                                   ^
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c integrateArea.cpp -o integrateArea.o
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c interface.cpp -o interface.o
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c miscell.cpp -o miscell.o
miscell.cpp: In function ‘void DIAlign::xicIntersect(std::vector<std::vector<double> >&, std::vector<std::vector<double> >&)’:
miscell.cpp:10:30: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
   10 |   for (unsigned int i = 0; i < len; i++){
      |                            ~~^~~~~
miscell.cpp:15:29: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
   15 |   for(unsigned int i = 0; i < len; i++){
      |                           ~~^~~~~
miscell.cpp:26:30: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
   26 |   for (unsigned int i = 0; i < len; i++){
      |                            ~~^~~~~
miscell.cpp:39:30: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘int’ [-Wsign-compare]
   39 |   for (unsigned int i = 0; i < len; i++) len2[i] = intensity[i].size();
      |                            ~~^~~~~
miscell.cpp: In function ‘std::vector<std::vector<double> > DIAlign::imputeChromatogram(const std::vector<std::vector<double> >&, const std::vector<double>&, const std::vector<int>&)’:
miscell.cpp:125:18: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<int>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  125 |   for(int i =0; i< middle.size(); i++){
      |                 ~^~~~~~~~~~~~~~~
miscell.cpp:131:19: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  131 |   for(int i =0; i < (Anew.size()-1); i++){
      |                 ~~^~~~~~~~~~~~~~~~~
miscell.cpp:139:19: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<double>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  139 |     for(int j=0; j<result.size(); j++){
      |                  ~^~~~~~~~~~~~~~
miscell.cpp: In function ‘std::vector<int> DIAlign::getSkip(const std::vector<int>&, const std::vector<int>&)’:
miscell.cpp:164:20: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<int>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  164 |   for(int i = 0; i < index.size(); i++){
      |                  ~~^~~~~~~~~~~~~~
miscell.cpp: In function ‘void DIAlign::mergeIntensity(std::vector<std::vector<double> >&, std::vector<std::vector<double> >&, double)’:
miscell.cpp:221:19: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  221 |   for(int i = 0; i< A.size(); i++){
      |                  ~^~~~~~~~~~
miscell.cpp: In function ‘void DIAlign::addFlankToLeft(const std::vector<double>&, std::vector<double>&, std::vector<double>&, const std::vector<std::vector<double> >&, std::vector<std::vector<double> >&, std::vector<int>&)’:
miscell.cpp:250:19: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  250 |   for(int i = 0; i< intenN.size(); i++){
      |                  ~^~~~~~~~~~~~~~~
miscell.cpp: In function ‘void DIAlign::addFlankToRight(const std::vector<double>&, std::vector<double>&, std::vector<double>&, const std::vector<std::vector<double> >&, std::vector<std::vector<double> >&, std::vector<int>&)’:
miscell.cpp:277:19: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  277 |   for(int i = 0; i< intenN.size(); i++){
      |                  ~^~~~~~~~~~~~~~~
miscell.cpp: In function ‘void DIAlign::addFlankToLeft1(const std::vector<std::vector<double> >&, std::vector<std::vector<double> >&, std::vector<int>&)’:
miscell.cpp:288:19: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  288 |   for(int i = 0; i< intenN.size(); i++){
      |                  ~^~~~~~~~~~~~~~~
miscell.cpp: In function ‘void DIAlign::addFlankToRight1(const std::vector<std::vector<double> >&, std::vector<std::vector<double> >&, std::vector<int>&)’:
miscell.cpp:307:19: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  307 |   for(int i = 0; i< intenN.size(); i++){
      |                  ~^~~~~~~~~~~~~~~
miscell.cpp: In function ‘std::vector<int> DIAlign::getMatchingIdx(const std::vector<double>&, const std::vector<double>&)’:
miscell.cpp:318:23: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<double>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  318 |   for(int i =0, j=0; i< tMain.size(); i++){
      |                      ~^~~~~~~~~~~~~~
miscell.cpp:320:12: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<double>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  320 |     for(; j<t.size();){
      |           ~^~~~~~~~~
miscell.cpp: In function ‘std::vector<std::vector<double> > DIAlign::imputeChromatogram1(const std::vector<std::vector<double> >&, const std::vector<int>&, const std::vector<double>&, const std::vector<double>&)’:
miscell.cpp:337:20: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  337 |   for(int j = 0; j <A.size(); j++){
      |                  ~~^~~~~~~~~
miscell.cpp:339:22: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<double>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  339 |     for(int i = 0; i < temp.size(); i++){
      |                    ~~^~~~~~~~~~~~~
miscell.cpp:353:18: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<int>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  353 |   for(int i =0; i< middle.size(); i++){
      |                 ~^~~~~~~~~~~~~~~
miscell.cpp:358:19: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<std::vector<double> >::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  358 |   for(int i =0; i < intensity.size(); i++){
      |                 ~~^~~~~~~~~~~~~~~~~~
miscell.cpp:360:19: warning: comparison of integer expressions of different signedness: ‘int’ and ‘std::vector<double>::size_type’ {aka ‘long unsigned int’} [-Wsign-compare]
  360 |     for(int j=0; j<result.size(); j++){
      |                  ~^~~~~~~~~~~~~~
miscell.cpp: At global scope:
miscell.cpp:53:19: warning: ‘const bool DIAlign::lessZero(double)’ defined but not used [-Wunused-function]
   53 | static bool const lessZero(double a){
      |                   ^~~~~~~~
In file included from miscell.h:9,
                 from miscell.cpp:3:
spline.h:390:10: warning: ‘double DIAlign::{anonymous}::tk::spline::deriv(int, double) const’ defined but not used [-Wunused-function]
  390 |   double spline::deriv(int order, double x) const
      |          ^~~~~~
spline.h:364:10: warning: ‘double DIAlign::{anonymous}::tk::spline::operator()(double) const’ defined but not used [-Wunused-function]
  364 |   double spline::operator() (double x) const
      |          ^~~~~~
spline.h:273:8: warning: ‘void DIAlign::{anonymous}::tk::spline::set_points(const std::vector<double>&, const std::vector<double>&, bool)’ defined but not used [-Wunused-function]
  273 |   void spline::set_points(const std::vector<double>& x,
      |        ^~~~~~
spline.h:261:8: warning: ‘void DIAlign::{anonymous}::tk::spline::set_boundary(DIAlign::{anonymous}::tk::spline::bd_type, double, DIAlign::{anonymous}::tk::spline::bd_type, double, bool)’ defined but not used [-Wunused-function]
  261 |   void spline::set_boundary(spline::bd_type left, double left_value,
      |        ^~~~~~
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c run_alignment.cpp -o run_alignment.o
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c simpleFcn.cpp -o simpleFcn.o
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c spline.cpp -o spline.o
In file included from spline.cpp:1:
spline.h:390:10: warning: ‘double DIAlign::{anonymous}::tk::spline::deriv(int, double) const’ defined but not used [-Wunused-function]
  390 |   double spline::deriv(int order, double x) const
      |          ^~~~~~
spline.h:261:8: warning: ‘void DIAlign::{anonymous}::tk::spline::set_boundary(DIAlign::{anonymous}::tk::spline::bd_type, double, DIAlign::{anonymous}::tk::spline::bd_type, double, bool)’ defined but not used [-Wunused-function]
  261 |   void spline::set_boundary(spline::bd_type left, double left_value,
      |        ^~~~~~
g++ -std=gnu++14 -I"/home/biocbuild/bbs-3.17-bioc/R/include" -DNDEBUG  -I'/home/biocbuild/bbs-3.17-bioc/R/library/Rcpp/include' -I'/home/biocbuild/bbs-3.17-bioc/R/library/RcppEigen/include' -I/usr/local/include    -fPIC  -g -O2  -Wall -c utils.cpp -o utils.o
utils.cpp: In function ‘double DIAlign::Utils::getQuantile(std::vector<double>, double)’:
utils.cpp:48:9: warning: unused variable ‘idx’ [-Wunused-variable]
   48 |     int idx = n*(1-p);
      |         ^~~
g++ -std=gnu++14 -shared -L/home/biocbuild/bbs-3.17-bioc/R/lib -L/usr/local/lib -o DIAlignR.so ChromatogramPeak.o DPosition.o MSChromatogram.o PeakIntegrator.o RcppExports.o Rmain.o SavitzkyGolayFilter.o affinealignment.o affinealignobj.o alignment.o chromSimMatrix.o constrainMat.o gapPenalty.o integrateArea.o interface.o miscell.o run_alignment.o simpleFcn.o spline.o utils.o -L/home/biocbuild/bbs-3.17-bioc/R/lib -lR
installing to /home/biocbuild/bbs-3.17-bioc/R/library/00LOCK-DIAlignR/00new/DIAlignR/libs
** R
** data
** inst
** byte-compile and prepare package for lazy loading
** help
*** installing help indices
** building package indices
** installing vignettes
** testing if installed package can be loaded from temporary location
** checking absolute paths in shared objects and dynamic libraries
** testing if installed package can be loaded from final location
** testing if installed package keeps a record of temporary installation path
* DONE (DIAlignR)

R Under development (unstable) (2023-01-14 r83615) -- "Unsuffered Consequences"
Copyright (C) 2023 The R Foundation for Statistical Computing
Platform: aarch64-unknown-linux-gnu (64-bit)

R is free software and comes with ABSOLUTELY NO WARRANTY.
You are welcome to redistribute it under certain conditions.
Type 'license()' or 'licence()' for distribution details.

R is a collaborative project with many contributors.
Type 'contributors()' for more information and
'citation()' on how to cite R or R packages in publications.

Type 'demo()' for some demos, 'help()' for on-line help, or
'help.start()' for an HTML browser interface to help.
Type 'q()' to quit R.

> library(testthat)
> library(DIAlignR)
> 
> test_check("DIAlignR")
[1] "hroest_K120808_Strep10%PlasmaBiolRepl1_R03_SW_filt"
[2] "hroest_K120809_Strep0%PlasmaBiolRepl2_R04_SW_filt" 
[3] "hroest_K120809_Strep10%PlasmaBiolRepl2_R04_SW_filt"
Time difference of 0.05571365 secs
Time difference of 0.321826 secs
Time difference of 0.1434445 secs
Time difference of 0.02903247 secs
Time difference of 0.01163697 secs
Time difference of 0.6853483 secs
Time difference of 2.451233 secs
Time difference of 0.02982736 secs
Time difference of 0.532124 secs
[1] "hroest_K120808_Strep10%PlasmaBiolRepl1_R03_SW_filt"
[2] "hroest_K120809_Strep0%PlasmaBiolRepl2_R04_SW_filt" 
Time difference of 0.01890039 secs
Time difference of 0.2938895 secs
Time difference of 0.116565 secs
Time difference of 0.0185287 secs
Time difference of 0.006987572 secs
Time difference of 0.3990333 secs
Time difference of 1.38228 secs
Time difference of 0.01057005 secs
Time difference of 1.316133 secs
[1] "hroest_K120808_Strep10%PlasmaBiolRepl1_R03_SW_filt"
[2] "hroest_K120809_Strep0%PlasmaBiolRepl2_R04_SW_filt" 
[3] "hroest_K120809_Strep10%PlasmaBiolRepl2_R04_SW_filt"
Time difference of 0.0215075 secs
Time difference of 0.3211443 secs
Time difference of 0.1228111 secs
Time difference of 0.114979 secs
Time difference of 0.01129818 secs
Time difference of 0.4065063 secs
Time difference of 2.309198 secs
Time difference of 0.02761006 secs
Time difference of 0.4339914 secs
[1] "hroest_K120808_Strep10%PlasmaBiolRepl1_R03_SW_filt"
[2] "hroest_K120809_Strep0%PlasmaBiolRepl2_R04_SW_filt" 
[3] "hroest_K120809_Strep10%PlasmaBiolRepl2_R04_SW_filt"
Time difference of 0.02008533 secs
Time difference of 0.0201602 secs
Time difference of 0.0005118847 secs
Time difference of 0.1829729 secs
Time difference of 0.02939391 secs
Time difference of 0.4269071 secs
Time difference of 0.02113533 secs
Time difference of 0.009748459 secs
Time difference of 0.1138303 secs
[1] "hroest_K120809_Strep0%PlasmaBiolRepl2_R04_SW_filt" 
[2] "hroest_K120809_Strep10%PlasmaBiolRepl2_R04_SW_filt"
[1] "PestMix1_8Step1Plasma1SWATH20-50" "PestMix1_8Step8Plasma1SWATH20-50"
Time difference of 0.0235281 secs
Time difference of 0.06825924 secs
Time difference of 0.01135683 secs
Time difference of 0.0272541 secs
Time difference of 0.02195334 secs
Time difference of 0.4481854 secs
Time difference of 0.1095066 secs
Time difference of 0.008830309 secs
Time difference of 0.3911991 secs
[1] "chludwig_K150309_004b_SW_1_16" "chludwig_K150309_008_SW_1_4"  
[3] "chludwig_K150309_013_SW_0"    
Time difference of 0.01966214 secs
Time difference of 0.01274753 secs
Time difference of 0.001278877 secs
Time difference of 0.019835 secs
Time difference of 0.02692389 secs
Time difference of 0.5920436 secs
Time difference of 0.007989645 secs
Time difference of 0.02423668 secs
Time difference of 0.4203339 secs
<simpleWarning in simpleLoess(y, x, w, span, degree = degree, parametric = parametric,     drop.square = drop.square, normalize = normalize, statistics = control$statistics,     surface = control$surface, cell = control$cell, iterations = iterations,     iterTrace = control$iterTrace, trace.hat = control$trace.hat): span too small.   fewer data values than degrees of freedom.>
<simpleWarning in simpleLoess(y, x, w, span, degree = degree, parametric = parametric,     drop.square = drop.square, normalize = normalize, statistics = control$statistics,     surface = control$surface, cell = control$cell, iterations = iterations,     iterTrace = control$iterTrace, trace.hat = control$trace.hat): span too small.   fewer data values than degrees of freedom.>
<simpleWarning in sqrt(sum.squares/one.delta): NaNs produced>
<simpleError in simpleLoess(y, x, w, span, degree = degree, parametric = parametric,     drop.square = drop.square, normalize = normalize, statistics = control$statistics,     surface = control$surface, cell = control$cell, iterations = iterations,     iterTrace = control$iterTrace, trace.hat = control$trace.hat): span is too small>
                                                runName
run0 hroest_K120808_Strep10%PlasmaBiolRepl1_R03_SW_filt
run1  hroest_K120809_Strep0%PlasmaBiolRepl2_R04_SW_filt
run2 hroest_K120809_Strep10%PlasmaBiolRepl2_R04_SW_filt
Time difference of 0.1145916 secs
Time difference of 0.01928282 secs
Time difference of 0.002468109 secs
Time difference of 0.01308131 secs
Time difference of 0.3803954 secs
Time difference of 0.02185345 secs
Time difference of 0.01853514 secs
Time difference of 0.111316 secs
                                                runName
run0 hroest_K120808_Strep10%PlasmaBiolRepl1_R03_SW_filt
run1  hroest_K120809_Strep0%PlasmaBiolRepl2_R04_SW_filt
run2 hroest_K120809_Strep10%PlasmaBiolRepl2_R04_SW_filt
Time difference of 0.04419231 secs
[1] "run0 run1\nrun2 run2"
Time difference of 0.4019487 secs
Time difference of 0.1424365 secs
Time difference of 0.01245213 secs
Time difference of 0.4846766 secs
Time difference of 2.187243 secs
Time difference of 0.02544188 secs
Time difference of 0.4318044 secs
                                                runName
run0 hroest_K120808_Strep10%PlasmaBiolRepl1_R03_SW_filt
run1  hroest_K120809_Strep0%PlasmaBiolRepl2_R04_SW_filt
run2 hroest_K120809_Strep10%PlasmaBiolRepl2_R04_SW_filt
Time difference of 0.1746669 secs
Time difference of 1.781157 secs
Time difference of 9.23755 secs
Time difference of 0.6032002 secs
                                                runName
run0 hroest_K120808_Strep10%PlasmaBiolRepl1_R03_SW_filt
run1  hroest_K120809_Strep0%PlasmaBiolRepl2_R04_SW_filt
run2 hroest_K120809_Strep10%PlasmaBiolRepl2_R04_SW_filt
Time difference of 0.1135838 secs
[1] "Written /home/biocbuild/bbs-3.17-bioc/R/library/DIAlignR/extdata/temp_prog1.RData"
[1] "Written /home/biocbuild/bbs-3.17-bioc/R/library/DIAlignR/extdata/temp_0_2.rds"
[1] "progTree1 is done."
Time difference of 2.02743 secs
Time difference of 0.5604372 secs
[1] "Written /home/biocbuild/bbs-3.17-bioc/R/library/DIAlignR/extdata/temp_1_2.rds"
Time difference of 0.8358366 secs
[1] "Written /home/biocbuild/bbs-3.17-bioc/R/library/DIAlignR/extdata/temp_2_2.rds"
Time difference of 0.5936229 secs
Time difference of 0.2687733 secs
[1] "Written /home/biocbuild/bbs-3.17-bioc/R/library/DIAlignR/extdata/temp_all_2.rds"
Time difference of 0.2457726 secs
                                                runName
run0 hroest_K120808_Strep10%PlasmaBiolRepl1_R03_SW_filt
run1  hroest_K120809_Strep0%PlasmaBiolRepl2_R04_SW_filt
run2 hroest_K120809_Strep10%PlasmaBiolRepl2_R04_SW_filt
Time difference of 0.1316769 secs
[1] "Written /home/biocbuild/bbs-3.17-bioc/R/library/DIAlignR/extdata/temp_prog1.RData"
[1] "Written /home/biocbuild/bbs-3.17-bioc/R/library/DIAlignR/extdata/temp_0_2.rds"
[1] "progTree1 is done."
Time difference of 1.615068 secs
Time difference of 0.51947 secs
[1] "Written /home/biocbuild/bbs-3.17-bioc/R/library/DIAlignR/extdata/temp_1_2.rds"
Time difference of 0.7606618 secs
[1] "Written /home/biocbuild/bbs-3.17-bioc/R/library/DIAlignR/extdata/temp_2_2.rds"
Time difference of 0.8088846 secs
Time difference of 0.01729321 secs
[1] "Written /home/biocbuild/bbs-3.17-bioc/R/library/DIAlignR/extdata/temp_all_2.rds"
Error : Unable to find conda binary. Is Anaconda installed?
Error : Unable to find conda binary. Is Anaconda installed?
Error : Unable to find conda binary. Is Anaconda installed?
[ FAIL 1 | WARN 9 | SKIP 8 | PASS 626 ]

══ Skipped tests ═══════════════════════════════════════════════════════════════
• empty test (5)
• ropenms not available for testing. A conda environment with name TricEnvr is MUST for testing. (3)

══ Failed tests ════════════════════════════════════════════════════════════════
── Failure ('test_utils.R:170'): test_ipfReassignFDR ───────────────────────────
`finalTbl` not equal to `expData`.
Column 'RT': 'is.NA' value mismatch: 2 in current 0 in target

[ FAIL 1 | WARN 9 | SKIP 8 | PASS 626 ]
Error: Test failures
Execution halted